Mill the main boxes from 3/4" material
Use this EASEL "link":http://easel.inventables.com/projects/wDsGw8JoZL8O7Hl6f8c1eQ
Change to a 1/32" bit to engrave the letters and numbers into the grid for the box
Use this EASEL "link":http://easel.inventables.com/projects/hPW_tznDAEG0tEp8W3N75g
Mill the lids for the box out of 1/4" material
Use this EASEL "link":http://easel.inventables.com/projects/De4GwEtEoqUDJhF9R1UADw
Change to a 1/32" bit to engrave the letters and numbers into the grid for the lid
Use this EASEL "link":http://easel.inventables.com/projects/UWTEos4mLkFP8HZa07RoSw
Flip the lids and align to mill the logos
Use this EASEL "link":http://easel.inventables.com/projects/S5XGyXKt9bGZ-_EANUk6Zw
mill the ships out of 1/4" material
Use this EASEL "link":http://easel.inventables.com/projects/qMUsISi8XM-c5b1zkeLpdw
Mill the tiles from 1/8" material. We used matte black acrylic. This is a good cut to use double sided tape.
Use this EASEL "link":http://easel.inventables.com/projects/LyxxfGRidOTX8CmQOzR2dA
Mill the tiles from 1/8" material. We used translucent red acrylic. This is a good cut to use double sided tape.
Use this EASEL "link":http://easel.inventables.com/projects/LyxxfGRidOTX8CmQOzR2dA
j,xhfvkxhvkl/xnbc
jkjkjk
Awesome design! Can you tell us how the lids get attached to the base?
Jeff Jones
Ok as i am new to this, How do you get your zeros exactly the same for the grid coordinates?
Robert Lee